Electric actuator
- Products
- Ball valve
- Butterfly valve
- Gate valve
- Globe Valve
- Check valve
- Anticorrosive valve
- Forged steel valve
- Regulating valve
- Hydraulic control valve
- Power station valve
- Drain valve
- Bellows valve
- Metallurgical valve
- Flame arrester and breathing valve
- Solenoid valve
- Needle valve
- Copper valve
- Ceramic valve
- Oil field valve
- Safety valve
- Actuator series
Motor Power: 110 / 220V AC, 1 Phase; 380 / 440V AC, 3 Phase; 50 / 60HZ, ± 10%
Control Power: 110 / 220V AC, 1 Phase 50 / 60HZ, ± 10%
Limit switch: 2 * On / Off, SPDT, 250V AC, 10A
Auxiliary limit switch: 2 * On / Off, SPDT, 250V AC, 10A
Stroke: 90 ° - 270 ± 10 ° ( described earlier above 90 °)
Manually: mechanical handle (optional handwheel)
Self-locking device: worm, worm mechanism provides self-locking
Electric actuator performance characteristics
1, the shell - due to the use of high-quality aluminum, light weight. And
the inner and outer surfaces by anodic oxidation treatment, the outer
surface of polyester powder coating, corrosion resistance.
2,
the motor - using SPG squirrel-cage motor, the output torque, and
built-in thermal protection switch, temperature control, to prevent
damage to the motor.
3, manual structure - no power, pull the clutch handle can be manually operated. When power is on, the clutch is automatically reset.
4, position indicator - indicator mounted on the central axis, you can observe the valve position. And a light (SLU) to choose from.
5,
dryer - used to control the temperature, to prevent the internal
condensation of the actuator, to keep the internal electrical components
dry.
6, limit switch - controlled by the cam mechanism, a simple adjustment mechanism can be precise and easy to set the position.
7, torque switch (except HQ-008) - can provide overload protection to prevent damage to the motor. (Factory set to set, please do not change the settings casually).
8, self-locking - a self-locking function to prevent reversal, rotating part of the stable and reliable.
9,
the installation - the bottom of the installation dimensions in line
with ISO5211 international standards, drive shaft sleeve can be removed
as needed for processing, adaptability. Can be installed vertically, but also horizontally.
10, Terminals - Line layout compact and reasonable, terminal diameter of 2.5mm, pressure, strong connection.
11,
worm wheel - the use of concave wheel design, and the large contact
surface of the worm, transmission torque, smooth and wear-resistant,
long service life.
